K&N 00-04 Dodge Intrepid / Chrysler 300M V6-3.5L Performance Intake Kit, 57-1522
- Description
- Additional information
- Reviews (0)
- Add a review
Description
K&N Fuel Injection Performance Kits (FIPK’s) are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow ¢ÂÂchain¢Â robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Fuel Injection Performance Kits (FIPK) virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER.
K&N Fuel Injection Performance Kits (FIPK) are truly state-of-the-art. K&N starts with the largest conical shaped high-flow air filter that can fit into the engine compartment while using factory holes and mounting points. This extra filter size provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next the filter is attached to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE). This process allows the tube to be precisely shaped to reduce turbulence and accelerate airflow into the engine. This is why some tubes have unique shapes that are specifically engineered for each application. Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life. Put all this together and you have the best high-flow intake system available today.
FEATURES
Guaranteed to Provide more HP and Increased Acceleration
Engineered to Specific Vehicle Design
Easy to Install, Usually in 90 minutes or less!
Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions)
Million Mile Limited Warranty
Replaces OEM Filter and Air Box
Air Filter is Washable and Reusable
Works with Original Equipment Manufacturer Computer Systems
Designed to use Factory Holes & Mounting Points Whenever Possible
Most are CARB Exempt and street legal in all 50 US States
WARNING: This product can expose you to chemicals, which is known to the State of California to Cause Cancer, Birth Defects, And Other Reproductive Harm.
Specifications for K&N 00-04 Dodge Intrepid / Chrysler 300M V6-3.5L Performance Intake Kit
Air Filter Color | Red |
Air Filter Height | 6.5 in (165 mm) |
Air Filter Large End Diameter | 6 in (152 mm) |
Air Filter Material | Cotton Gauze |
Air Filter Outlet Shape | Round |
Clamp Material | Stainless Steel |
Clamp Style | MIDI |
Clamps Included | 2 |
Couplers Included | Estimated HorsePower Gain |
8.46 HP @ 5482 RPM | Horse Power Increase |
8 HP | Intake Pipe Color / Finish |
Black | Product Style |
57 Series FIPK | Replacement Filter |
RX-4730 | RPM |
5482 | Type |
Gen II | Weight |
8.7 lb (4 kg) | Intake Pipe Material |
High-Density Polyethylene | CARB EO Number |
D-269-28 | Title |
K&N 57-1522 Performance Intake Kit | Estimated Horse Power Gain |
8.46 HP @ 5482 RPM | Filter Color |
Red | Filter Material |
Cotton Gauze | Mounting Hardware Included |
Yes | Product Box Height |
12.5 in (318 mm) | Product Box Length |
22.25 in (565 mm) | Product Box Width |
14.25 in (362 mm) | Street Legal In All US States |
Yes | TUV Approved (Europe) |
No | Air Filter Height |
6.50 in. (165mm) | Item Weight |
8.70 lb. (4 kg) | Product Box Height |
12.50 in. (318mm) | Product Box Length |
22.25 in. (565mm) | Product Box Width |
14.25 in. (362 mm) | Street Legal |
Yes | Title |
K&N 57-1522 Performance Air Intake System | Air Box Included |
No | Air Filter Element Washable |
Yes | Air Filter Oulet Length |
3.00 in. (76 mm) | Air Filter Oulet Width |
3.00 in. (76 mm) | Clamp Color |
Natural | Coupler Color |
Not Applicable | Mass Air Flow Sensor Included |
Mass Air Flow Sensor Adapter Included When Required | Oil Included |
Filter Is Pre-Oiled | Package Material |
Paperboard | Package Type |
Box | Air Filter Outlet Length |
3 in (76 mm) | Air Filter Outlet Width |
3 in (76 mm) | Air Filter Washable |
Yes | Clamp Color/Finish |
Natural | Coupler Color/Finish |
Not Applicable | Mass Air Flow Sensor Adapter Included |
Mass Air Flow Sensor Adapter Included When Required | Warranty |
1,000,000 Miles/10 Year | Couplers Included |
None | Clamp Quantity |
2 | WARNING CA Proposition 65 |
Yes | WARNING CA Proposition 65 Message |
Vehicle Fitment for K&N 00-04 Dodge Intrepid / Chrysler 300M V6-3.5L Performance Intake Kit:
- 2000 Chrysler 300M Base V6.3497cc
- 2000: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2001 Chrysler 300M Base V6.3497cc
- 2001: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2002 Chrysler 300M Base V6.3497cc
- 2002: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2003 Chrysler 300M Base V6.3497cc
- 2003: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2004 Chrysler 300M Base V6.3497cc
- 2004: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2003 Chrysler 300M Pro-Am V6.3497cc
- 2003: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2002 Chrysler 300M Special V6.3497cc
- 2002: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2003 Chrysler 300M Special V6.3497cc
- 2003: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2004 Chrysler 300M Special V6.3497cc
- 2004: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2002 Dodge Intrepid ES V6.3497cc
- 2002: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2003 Dodge Intrepid ES V6.3497cc
- 2003: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2000 Dodge Intrepid R/T V6.3497cc
- 2000: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2001 Dodge Intrepid R/T V6.3497cc
- 2001: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2002 Dodge Intrepid R/T V6.3497cc
- 2002: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2001 Dodge Intrepid SE V6.3497cc
- 2001: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2002 Dodge Intrepid SE V6.3497cc
- 2002: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2003 Dodge Intrepid SE V6.3497cc
- 2003: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2003 Dodge Intrepid SXT V6.3497cc
- 2003: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
- 2004 Dodge Intrepid SXT V6.3497cc
- 2004: Incl. Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 8.46 HP At 5482 RPM;CARB E.O. D-269-28 California Air Resources Board Exempt: Yes; CARB EO: D-269-28
Additional information
- Package Weight
- 8 lbs
- Package Dimensions
- 22 × 14 × 12 in
- UPC
024844100269
- MPN
57-1522
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
- There are no reviews yet.
Related Products
Turbo XS Mazdaspeed3 Cold Air Intake, txs-MS3-CAI
Alta 02-06 R53 Mini Black Intake – No Silicone Inlet Hose, AMP-INT-300BK
Cold Air Intakes $191.25 + Add to cart
Bully Dog Rapid Flow Intake open Dodge Ram 5.9L Cummins 94-02, 52100
Cold Air Intakes $369.99 + Add to cart
Alta 07+ R56 Mini Cooper S Black Intake Box *EUROPEAN VERSION*, AMP-INT-401BK-EU
Cold Air Intakes $283.05 + Add to cart