StopTech 01-05 BMW 325i Front BBK w/Red ST-40 Calipers 332x32mm Zinc Slotted Rotors Pads & SS Lines, 83.133.4600.73
- Description
- Additional information
- Reviews (0)
- Add a review
Description
A StopTech Big Brake Kit represents the ultimate high performance brake upgrades and gives vehicles that supercar look and feel.
StopTech Big Brake Kits exceed stock performance in two key areas: First, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel and confidence-inspiring responsiveness.
The key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle’s stock front-to-rear brake torque ratio. That is why StopTech developed the Balanced Brake Upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.
In contrast, a brake upgrade that adds too much front torque (as many do), will reduce your car’s ability to maximize the traction available from all four tires, robbing you of performance. In addition, a system that uses too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, limiting a driver’s control of brake input.
The Stiffest, Fully Forged 2-piece, Opposed Piston Calipers
StopTech 2-piece calipers have the lowest amount of flex and deflection among 25 of the leading caliper models (including some monoblocks) from well-known manufacturers. This is accomplished using StopTech’s patented bolt-in bridge, which is strong enough to stop distortion without sacrificing cooling through the top of the caliper.
The standard StopTech caliper finish is a glossy high temperature paint available in one of six different colors – red, black, silver, blue, yellow and gold. Trophy Sport and Trophy Race Big Brake Kits use weight-optimized STR calipers finished with a deep natural anodized coating that resists fading and discoloration at extreme temperatures.
Less vibration
Less Noise
Better pedal feel under extreme braking conditions
Faster braking response
Less pad taper
Patented AeroRotors and AeroHats that offer up to 80% greater airflow
StopTech has developed several design innovations to improve rotor airflow. The patented 2-piece AeroRotors push more air thanks to curved, airfoil-shaped vanes and an air channel that widens at the trailing edge of the vanes. StopTech aluminum AeroHats are lighter, and feature directional stand-offs between the rotor and mounting hat that increase airflow to the (hotter) outside face of the rotor by over 15%.
Specifically engineered and patented AeroVanes for optimum cooling
Optimized to provide even performance and consistent feedback
Longer pad and rotor life
Hard Anodized 6061-T6 Billet aluminum Mounting Brackets with Stainless Steel Studs
Application-specific hardware that is stronger than most competitors, with studs instead of the more commonly used bolts and hard anodized aluminum billet composition.
Hard anodized billet aluminum mounting brackets
Stainless steel studs secured with set screws for strength and durability
Fully machined aluminum or steel that is precise and strong
Application specific design for precise and proper fitment
All necessary hardware for easy installation
StopTech Stainless Steel Brake Line Kits
Braided stainless steel lines reduce system compliance and improve brake pedal feel and modulation. StopTech’s Stainless Steel Brake Lines are D.O.T. compliant and designed to fit your vehicle.
Stainless steel braiding for lower compliance and extra protection
Provides quicker response
Firmer pedal feel
A variety of fittings for hundreds of applications
All necessary brackets and fasteners for easy installation
Better brake modulation
D.O.T. compliant
StopTech Street Performance Brake Pads
StopTech Street Performance Brake Pads are included in all Big Brake Kits besides the track-only Trophy Race Big Brake Kits. StopTech Street Performance Pads are intended for high performance street driving as well as light duty track use.
Aggressive pad for high performance street driving
Para-aramid composites provide linear response regardless of pad temperature
100% positive molded for uniform friction material density
Low dust formulation is rotor friendly and leaves wheels cleaner
Scorched to raise initial cold effectiveness and ease bed-in
100% Asbestos-free formulas
WARNING: This product can expose you to chemicals, which is known to the State of California to Cause Cancer, Birth Defects, And Other Reproductive Harm.
Specifications for StopTech 01-05 BMW 325i Front BBK w/Red ST-40 Calipers 332x32mm Zinc Slotted Rotors Pads & SS Lines
Position | Front |
Caliper Color | Red |
Rotor Size | 332x32mm, 2-Piece |
Rotor Style | Slotted, Zinc Coating |
Caliper Type | ST-40 |
Vehicle Fitment for StopTech 01-05 BMW 325i Front BBK w/Red ST-40 Calipers 332x32mm Zinc Slotted Rotors Pads & SS Lines:
- 1996 BMW 318i Base L4.1895cc
- 1996: Fr 5/96 4 Piston Caliper 332x32mm Rotor
- 1997 BMW 318i Base L4.1895cc
- 1997: 4 Piston Caliper 332x32mm Rotor
- 1998 BMW 318i Base L4.1895cc
- 1998: 4 Piston Caliper 332x32mm Rotor
- 1996 BMW 318is Base L4.1895cc
- 1996: Fr 5/96 4 Piston Caliper 332x32mm Rotor
- 1997 BMW 318is Base L4.1895cc
- 1997: 4 Piston Caliper 332x32mm Rotor
- 1995 BMW 318ti Base L4.1796cc
- 1995: 4 Piston Caliper 332x32mm Rotor
- 1996 BMW 318ti Base L4.1895cc
- 1996: 4 Piston Caliper 332x32mm Rotor
- 1997 BMW 318ti Base L4.1895cc
- 1997: 4 Piston Caliper 332x32mm Rotor
- 1998 BMW 318ti Base L4.1895cc
- 1998: 4 Piston Caliper 332x32mm Rotor
- 1999 BMW 318ti Base L4.1895cc
- 1999: 4 Piston Caliper 332x32mm Rotor
- 2000 BMW 323Ci Base L6.2494cc
- 2000: Convertible 4 Piston Caliper 332x32mm Rotor
- 1998 BMW 323i Base L6.2494cc
- 1998: 4 Piston Caliper 332x32mm Rotor
- 1999 BMW 323i Base L6.2494cc
- 1999: 4 Piston Caliper 332x32mm Rotor
- 2000 BMW 323i Base L6.2494cc
- 2000: 4 Piston Caliper 332x32mm Rotor
- 1998 BMW 323is Base L6.2494cc
- 1998: 4 Piston Caliper 332x32mm Rotor
- 1999 BMW 323is Base L6.2494cc
- 1999: 4 Piston Caliper 332x32mm Rotor
- 2001 BMW 325Ci Base L6.2494cc
- 2001: 4 Piston Caliper 332x32mm Rotor
- 2002 BMW 325Ci Base L6.2494cc
- 2002: 4 Piston Caliper 332x32mm Rotor
- 2003 BMW 325Ci Base L6.2494cc
- 2003: 4 Piston Caliper 332x32mm Rotor
- 2004 BMW 325Ci Base L6.2494cc
- 2004: 4 Piston Caliper 332x32mm Rotor
- 2005 BMW 325Ci Base L6.2494cc
- 2005: 4 Piston Caliper 332x32mm Rotor
- 2006 BMW 325Ci Base L6.2494cc
- 2006: 4 Piston Caliper 332x32mm Rotor
- 1991 BMW 325i Base L6.2494cc
- 1991: Fr 5/91 4 Piston Caliper 332x32mm Rotor
- 1992 BMW 325i Base L6.2494cc
- 1992: Fr 5/91 4 Piston Caliper 332x32mm Rotor
- 1993 BMW 325i Base L6.2494cc
- 1993: Fr 5/91 4 Piston Caliper 332x32mm Rotor
- 1994 BMW 325i Base L6.2494cc
- 1994: Fr 5/91 4 Piston Caliper 332x32mm Rotor
- 1995 BMW 325i Base L6.2494cc
- 1995: Fr 5/91 4 Piston Caliper 332x32mm Rotor
- 2001 BMW 325i Base L6.2494cc
- 2001: 4 Piston Caliper 332x32mm Rotor
- 2002 BMW 325i Base L6.2494cc
- 2002: 4 Piston Caliper 332x32mm Rotor
- 2003 BMW 325i Base L6.2494cc
- 2003: 4 Piston Caliper 332x32mm Rotor
- 2004 BMW 325i Base L6.2494cc
- 2004: 4 Piston Caliper 332x32mm Rotor
- 2005 BMW 325i Base L6.2494cc
- 2005: 4 Piston Caliper 332x32mm Rotor
- 1991 BMW 325is Base L6.2494cc
- 1991: Fr 5/91 4 Piston Caliper 332x32mm Rotor
- 1992 BMW 325is Base L6.2494cc
- 1992: Fr 5/91 4 Piston Caliper 332x32mm Rotor
- 1993 BMW 325is Base L6.2494cc
- 1993: Fr 5/91 4 Piston Caliper 332x32mm Rotor
- 1994 BMW 325is Base L6.2494cc
- 1994: Fr 5/91 4 Piston Caliper 332x32mm Rotor
- 1995 BMW 325is Base L6.2494cc
- 1995: Fr 5/91 4 Piston Caliper 332x32mm Rotor
- 1991 BMW 325iX Base L6.2494cc
- 1991: Fr 5/91 4 Piston Caliper 332x32mm Rotor
- 2000 BMW 328Ci Base L6.2793cc
- 2000: 4 Piston Caliper 332x32mm Rotor
- 1996 BMW 328i Base L6.2793cc
- 1996: 4 Piston Caliper 332x32mm Rotor
- 1997 BMW 328i Base L6.2793cc
- 1997: 4 Piston Caliper 332x32mm Rotor
- 1998 BMW 328i Base L6.2793cc
- 1998: 4 Piston Caliper 332x32mm Rotor
- 1999 BMW 328i Base L6.2793cc
- 1999: 4 Piston Caliper 332x32mm Rotor
- 2000 BMW 328i Base L6.2793cc
- 2000: 4 Piston Caliper 332x32mm Rotor
- 1996 BMW 328is Base L6.2793cc
- 1996: 4 Piston Caliper 332x32mm Rotor
- 1997 BMW 328is Base L6.2793cc
- 1997: 4 Piston Caliper 332x32mm Rotor
- 1998 BMW 328is Base L6.2793cc
- 1998: 4 Piston Caliper 332x32mm Rotor
- 1999 BMW 328is Base L6.2793cc
- 1999: 4 Piston Caliper 332x32mm Rotor
- 1999 BMW Z3 Coupe L6.2793cc
- 1999: 4 Piston Caliper 332x32mm Rotor
- 2000 BMW Z3 Coupe L6.2793cc
- 2000: 4 Piston Caliper 332x32mm Rotor
- 2001 BMW Z3 Coupe L6.2979cc
- 2001: 4 Piston Caliper 332x32mm Rotor
- 2002 BMW Z3 Coupe L6.2979cc
- 2002: 4 Piston Caliper 332x32mm Rotor
- 1996 BMW Z3 Roadster L4.1895cc
- 1996: 4 Piston Caliper 332x32mm Rotor
- 1997 BMW Z3 Roadster L4.1895cc
- 1997: 4 Piston Caliper 332x32mm Rotor
- 1998 BMW Z3 Roadster L4.1895cc
- 1998: 4 Piston Caliper 332x32mm Rotor
- 1999 BMW Z3 Roadster L6.2494cc
- 1999: 4 Piston Caliper 332x32mm Rotor
- 2000 BMW Z3 Roadster L6.2494cc
- 2000: 4 Piston Caliper 332x32mm Rotor
- 2001 BMW Z3 Roadster L6.2494cc
- 2001: 4 Piston Caliper 332x32mm Rotor
- 2002 BMW Z3 Roadster L6.2494cc
- 2002: 4 Piston Caliper 332x32mm Rotor
- 1997 BMW Z3 Roadster L6.2793cc
- 1997: 4 Piston Caliper 332x32mm Rotor
- 1998 BMW Z3 Roadster L6.2793cc
- 1998: 4 Piston Caliper 332x32mm Rotor
- 1999 BMW Z3 Roadster L6.2793cc
- 1999: 4 Piston Caliper 332x32mm Rotor
- 2000 BMW Z3 Roadster L6.2793cc
- 2000: 4 Piston Caliper 332x32mm Rotor
- 2001 BMW Z3 Roadster L6.2979cc
- 2001: 4 Piston Caliper 332x32mm Rotor
- 2002 BMW Z3 Roadster L6.2979cc
- 2002: 4 Piston Caliper 332x32mm Rotor
- 2003 BMW Z4 2.5i L6.2494cc
- 2003: 4 Piston Caliper 332x32mm Rotor
- 2004 BMW Z4 2.5i L6.2494cc
- 2004: 4 Piston Caliper 332x32mm Rotor
- 2005 BMW Z4 2.5i L6.2494cc
- 2005: 4 Piston Caliper 332x32mm Rotor
- 2003 BMW Z4 3.0i L6.2979cc
- 2003: 4 Piston Caliper 332x32mm Rotor
- 2004 BMW Z4 3.0i L6.2979cc
- 2004: 4 Piston Caliper 332x32mm Rotor
- 2005 BMW Z4 3.0i L6.2979cc
- 2005: 4 Piston Caliper 332x32mm Rotor
- 2006 BMW Z4 Roadster 3.0i L6.2996cc
- 2006: To 1/06 4 Piston Caliper 332x32mm Rotor
- 2007 BMW Z4 Roadster 3.0i L6.2996cc
- 2007: 4 Piston Caliper 332x32mm Rotor
- 2008 BMW Z4 Roadster 3.0i L6.2996cc
- 2008: 4 Piston Caliper 332x32mm Rotor
Additional information
- Package Weight
- 72 lbs
- Package Dimensions
- 52 × 32 × 28 in
- UPC
805890366522
- MPN
83.133.4600.73
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
- There are no reviews yet.
Related Products
Wilwood Dynapro Radial4 / MC4 Rear Kit 12.19 Drilled 2014-2015 Mini Cooper w/Lines & Cables, 140-15219-D
Big Brake Kits $2,012.99 + Add to cart
Wilwood Forged Dynalite Front Kit 11.03in 1 PC Rotor&Hub 74-80 Pinto/Mustang II Disc Spindle only, 140-14271
Big Brake Kits $696.86 + Add to cart
Wilwood Dynapro Radial4 / MC4 Rear Kit 12.19 Drilled Red 2014-2015 Mini Cooper w/Lines & Cables, 140-15219-DR
Big Brake Kits $2,012.99 + Add to cart
Wilwood Dynapro Low-Profile 11.00in P-Brake Kit Strange Eng Floater 3.49in Offset, 140-13952
Big Brake Kits $1,259.30 + Add to cart