Fluidampr 00-09 Honda S2000 F20C/F22C Steel Internally Balanced Damper, 530601
Price
Original price was: $556.99.$473.45Current price is: $473.45.
Total
Original price was: $556.99.$473.45Current price is: $473.45.
- Description
- Additional information
- Reviews (0)
- Add a review
Description
Fluidampr Engine Dampers are designed to control destructive vibrations which are transfered thru the crankshaft.
Each time the air/fuel mixture inside a cylinder is ignited, the combustion that occurs creates a torque spike that is applied to the crankshaft through the piston and rod. This torque spike is so severe that it not only turns the crankshaft, it actually twists the crankshaft ahead of its normal rotation and then the crankshaft rebounds. This twisting action is known as torsional vibration. When these torque spikes and forces get into phase with the natural frequency, critical torsional harmonic vibrations occur and can be seriously destructive to the bearings and the crankshaft. Dampers are designed to control those destructive vibrations.
Critical harmonic vibrations occur numerous times in a engine¢ÂÂs operating range. Stock rubber and elastomer-type dampers are frequency sensitive ¢ÂÂtuned absorbers¢ÂÂ, and work at only one critical frequency. In the case of a stock rubber damper, it is tuned for a factory engine¢ÂÂs critical harmonic vibrations. If you change the mass of pistons, rods, or the crankshaft, you change the natural frequency of the crankshaft assembly; therefore, the stock damper is no longer tuned to the new frequency of vibration, and you may be headed for early failure of expensive engine components. Dampers also create heat while they work, and rubber is a poor dissipator of heat. This heat and the exposure to the elements deteriorates rubber, causing it to crack and change durometer, which then leads to inertia ring slippage, damper failure, uncontrolled torsional vibration, and costly engine parts breakage.
WARNING: This product can expose you to chemicals, which is known to the State of California to Cause Cancer, Birth Defects, And Other Reproductive Harm.
Vehicle Fitment for Fluidampr 00-09 Honda S2000 F20C/F22C Steel Internally Balanced Damper:
- 2000 Honda S2000 Base L4.1997cc
- 2000: WT. in lbs.()=Rotating weight: 5.7 (3.8 Rwt) Safety Rating: SFI 18.1 O.D.: 5-1/2″ (5.500) Mounting Hardware Incl.: No Material: Steel Length: 2.06 Keyway: Single Finish: Black Zinc Engine Balance: Internal Degree Markings: Yes Degree Marking Range: TDC 7,9,11 degrees Bore Dia. Min/Max: 1.1815 / 1.1825
- 2001 Honda S2000 Base L4.1997cc
- 2001: WT. in lbs.()=Rotating weight: 5.7 (3.8 Rwt) Safety Rating: SFI 18.1 O.D.: 5-1/2″ (5.500) Mounting Hardware Incl.: No Material: Steel Length: 2.06 Keyway: Single Finish: Black Zinc Engine Balance: Internal Degree Markings: Yes Degree Marking Range: TDC 7,9,11 degrees Bore Dia. Min/Max: 1.1815 / 1.1825
- 2002 Honda S2000 Base L4.1997cc
- 2002: WT. in lbs.()=Rotating weight: 5.7 (3.8 Rwt) Safety Rating: SFI 18.1 O.D.: 5-1/2″ (5.500) Mounting Hardware Incl.: No Material: Steel Length: 2.06 Keyway: Single Finish: Black Zinc Engine Balance: Internal Degree Markings: Yes Degree Marking Range: TDC 7,9,11 degrees Bore Dia. Min/Max: 1.1815 / 1.1825
- 2003 Honda S2000 Base L4.1997cc
- 2003: WT. in lbs.()=Rotating weight: 5.7 (3.8 Rwt) Safety Rating: SFI 18.1 O.D.: 5-1/2″ (5.500) Mounting Hardware Incl.: No Material: Steel Length: 2.06 Keyway: Single Finish: Black Zinc Engine Balance: Internal Degree Markings: Yes Degree Marking Range: TDC 7,9,11 degrees Bore Dia. Min/Max: 1.1815 / 1.1825
- 2004 Honda S2000 Base L4.2157cc
- 2004: WT. in lbs.()=Rotating weight: 5.7 (3.8 Rwt) Safety Rating: SFI 18.1 O.D.: 5-1/2″ (5.500) Mounting Hardware Incl.: No Material: Steel Length: 2.06 Keyway: Single Finish: Black Zinc Engine Balance: Internal Degree Markings: Yes Degree Marking Range: TDC 7,9,11 degrees Bore Dia. Min/Max: 1.1815 / 1.1825
- 2005 Honda S2000 Base L4.2157cc
- 2005: WT. in lbs.()=Rotating weight: 5.7 (3.8 Rwt) Safety Rating: SFI 18.1 O.D.: 5-1/2″ (5.500) Mounting Hardware Incl.: No Material: Steel Length: 2.06 Keyway: Single Finish: Black Zinc Engine Balance: Internal Degree Markings: Yes Degree Marking Range: TDC 7,9,11 degrees Bore Dia. Min/Max: 1.1815 / 1.1825
- 2006 Honda S2000 Base L4.2157cc
- 2006: WT. in lbs.()=Rotating weight: 5.7 (3.8 Rwt) Safety Rating: SFI 18.1 O.D.: 5-1/2″ (5.500) Mounting Hardware Incl.: No Material: Steel Length: 2.06 Keyway: Single Finish: Black Zinc Engine Balance: Internal Degree Markings: Yes Degree Marking Range: TDC 7,9,11 degrees Bore Dia. Min/Max: 1.1815 / 1.1825
- 2007 Honda S2000 Base L4.2157cc
- 2007: WT. in lbs.()=Rotating weight: 5.7 (3.8 Rwt) Safety Rating: SFI 18.1 O.D.: 5-1/2″ (5.500) Mounting Hardware Incl.: No Material: Steel Length: 2.06 Keyway: Single Finish: Black Zinc Engine Balance: Internal Degree Markings: Yes Degree Marking Range: TDC 7,9,11 degrees Bore Dia. Min/Max: 1.1815 / 1.1825
- 2008 Honda S2000 Base L4.2157cc
- 2008: WT. in lbs.()=Rotating weight: 5.7 (3.8 Rwt) Safety Rating: SFI 18.1 O.D.: 5-1/2″ (5.500) Mounting Hardware Incl.: No Material: Steel Length: 2.06 Keyway: Single Finish: Black Zinc Engine Balance: Internal Degree Markings: Yes Degree Marking Range: TDC 7,9,11 degrees Bore Dia. Min/Max: 1.1815 / 1.1825
- 2009 Honda S2000 Base L4.2157cc
- 2009: WT. in lbs.()=Rotating weight: 5.7 (3.8 Rwt) Safety Rating: SFI 18.1 O.D.: 5-1/2″ (5.500) Mounting Hardware Incl.: No Material: Steel Length: 2.06 Keyway: Single Finish: Black Zinc Engine Balance: Internal Degree Markings: Yes Degree Marking Range: TDC 7,9,11 degrees Bore Dia. Min/Max: 1.1815 / 1.1825
- 2008 Honda S2000 CR L4.2157cc
- 2008: WT. in lbs.()=Rotating weight: 5.7 (3.8 Rwt) Safety Rating: SFI 18.1 O.D.: 5-1/2″ (5.500) Mounting Hardware Incl.: No Material: Steel Length: 2.06 Keyway: Single Finish: Black Zinc Engine Balance: Internal Degree Markings: Yes Degree Marking Range: TDC 7,9,11 degrees Bore Dia. Min/Max: 1.1815 / 1.1825
- 2009 Honda S2000 CR L4.2157cc
- 2009: WT. in lbs.()=Rotating weight: 5.7 (3.8 Rwt) Safety Rating: SFI 18.1 O.D.: 5-1/2″ (5.500) Mounting Hardware Incl.: No Material: Steel Length: 2.06 Keyway: Single Finish: Black Zinc Engine Balance: Internal Degree Markings: Yes Degree Marking Range: TDC 7,9,11 degrees Bore Dia. Min/Max: 1.1815 / 1.1825
Additional information
- Package Weight
- 6 lbs
- Package Dimensions
- 10 × 10 × 4 in
- MPN
530601
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
- There are no reviews yet.
Related Products
Fluidampr Mitsubishi EVO 8 / 9 Steel Internally Balanced Damper, 610701
Crankshaft Dampers Original price was: $488.99.$415.65Current price is: $415.65. + Add to cart
Fluidampr Pontiac 151 CID (25 Liter) Steel Internally Balanced Damper, 620101
Crankshaft Dampers Original price was: $444.99.$378.25Current price is: $378.25. + Add to cart
Fluidampr Subaru EJ Series Steel Internally Balanced Damper, 531101
Crankshaft Dampers Original price was: $556.99.$473.45Current price is: $473.45. + Add to cart
Fluidampr Honda All B Series PS Air / Alt Pulley Steel Internally Balanced Damper, 590601
Crankshaft Dampers Original price was: $556.99.$473.45Current price is: $473.45. + Add to cart