Dinan Big Turbo BMW F87 M2 12-16, BMW N55 Engine (EWG) 16-17, D310-0110A
- Description
- Additional information
- Reviews (0)
- Add a review
Description
For the racing enthusiast or those just looking for the best, this is the ultimate upgrade to fully maximize the power output of your F87 M2. The stock turbocharger is replaced with one that utlizes a larger compressor wheel that allows 30% greater flow, thus enabling additional boost pressures at higher engine speeds while retaining efficiency. These are fully cast turbos that are manufactured to Dinan specifications along with an upgraded thrust system over the stock turbo to ensure reliable and prolonged life. In order to attain maximum advertised power gains these big turbos will need to be paired with DINANTRONICS Stage 4, as well as Dinans intercooler to fully regulate the boost increase and deliver a polished product although the exhaust and intake are also recommended.Â
Specifications for Dinan Big Turbo BMW F87 M2 12-16, BMW N55 Engine (EWG) 16-17
Installation Time (hrs) | F87 M2, F22 M235i RWD, F30 335i RWD, F32/F36 435i RWD – 5.0 hrs |
F22 M235i xDrive, F30 335i xDrive, F32 435i xDrive – 9.9 hrs | F34 335i xDrive, F36 435i xDrive – 10.4 hrs |
Turbo Inlet Inside Diameter (in) | 53.4mm |
Turbo Outlet Inside Diameter (in) | Stock |
CARB (California) Compliant | Yes |
CARB EO# | D-176-49 |
Bullet Point #1 | Fully cast turbo that is manufactured to Dinan specifications with an upgraded thrust system thereby avoiding lengthy turnaround times caused by a core exchange program. |
Bullet Point #2 | Larger billet compressor/impeller wheel that allows ~30% greater flow over stock which then enables additional boost to be realized while retaining efficiency. |
Bullet Point #3 | Turbo assembly is compatible with electric wastegate vehicles only. |
Bullet Point #4 | Peak power: 446 HP @ 6500 RPM and 458 ft-lbs @ 4500 RPM and a max gain of 101 HP @ 6500 RPM and 86 ft-lbs @ 4500 RPM when coupled with other Dinan Performance upgrades. (Data from F87 M2.) 445 HP @ 6000 RPM and 455 ft-lbs @ 3000 RPM and a max gain of 128 HP @ 6000 RPM and 113 ft-lbs @ 6000 RPM when coupled with other Dinan Performance upgrades. (Data from F22 M235i.) 448 HP @ 6500 RPM and 417 ft-lbs @ 3000 RPM and a max gain of 152 HP @ 6500 RPM and 123 ft-lbs @ 6500 RPM when coupled with other |
Bullet Point #5 | Dinan Installation instructions detail a procedure which is quicker than BMW’s turbo replacement procedure saving the end-user money and time at the shop (Applicable to RWD vehicles only). |
Bullet Point #6 | Includes o-rings and gaskets needed for complete installation on a RWD vehicle only. If installing on an xDrive vehicle Dinan P/N D313-0117 is required for additional installation hardware. |
Bullet Point #7 | Factory matching new car warranty (4yr/50k) when run in Dinan specification. |
Bullet Point #8 | 50 State Emissions legal; CARB EO # D-176-49. |
Bullet Point #9 | Installation procedure requires factory-level tools such as BMW ISTA (or equivalent) to adjust wastegate for proper operation. |
Turbo Inlet Inside Diameter (mm) | 53.4 |
Vehicle Fitement for Dinan Big Turbo BMW F87 M2 12-16, BMW N55 Engine (EWG) 16-17:
- 2013 BMW 335i Base
- 2014 BMW 335i Base
- 2015 BMW 335i Base
- 2014 BMW 335i GT xDrive Base
- 2015 BMW 335i GT xDrive Base
- 2014 BMW 435i Base
- 2015 BMW 435i Base
- 2016 BMW 435i Base
- 2015 BMW 435i Gran Coupe Base
- 2016 BMW 435i Gran Coupe Base
- 2016 BMW M2 Base
- 2017 BMW M2 Base
- 2014 BMW M235i Base
- 2015 BMW M235i Base
- 2016 BMW M235i Base
Additional information
- Package Weight
- 11 lbs
- Package Dimensions
- 14 × 14 × 11 in
- MPN
D310-0110A
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
- There are no reviews yet.
Related Products
Garrett GT2554R Turbocharger CHRA 835995-0001 8mm C/R 471171-5003S, 836023-5001S
Turbochargers Original price was: $1,206.99.$862.99Current price is: $862.99. + Add to cart